techhub logo
Home of Tech Reviews and How Tos
Home of Tech Reviews and How Tos

The Best Ways On How To Boost Your Wi-Fi Signal

By: Osinachi
Published: May 5, 2021

There are various options for increasing your internet speed without purchasing a new router.

These easy techniques will help you improve your network if your browsing is slowing down, you can’t stream, or your Wi-Fi signals are dropping.

Check out these fast suggestions for boosting your router’s wireless signal, extending and optimizing your Wi-Fi coverage, and speeding up your browsing.

Examine Your Internet Connection (Wired)

Check the internet going into your house before blaming the Wi-Fi.

If your laptop doesn’t have an Ethernet port, use an Ethernet cable to connect it to your modem. If your laptop doesn’t have an Ethernet port, you’ll need a USB to Ethernet adapter.

To find out how fast your internet is, take a speed test. You may need to contact your ISP or change your modem if it does not match the speed on your internet bill.

If your speed test and internet bill match, but your internet still seem slow, it may be time to upgrade to a better plan.

If the modem appears to be in good working order, repeat the test wirelessly while standing immediately near the router. If you obtain identical speeds near the router but not elsewhere in the home, it’s possible that your Wi-Fi coverage is to blame.

If your internet is still slow while you’re standing directly close to the router, you may need to improve your equipment.

Update The Firmware On Your Router

It’s a good idea to update your router before you start tinkering. Router manufacturers are always updating their software in order to increase the speed of their routers.

Most modern routers have the firmware upgrading procedure incorporated directly into the management interface, so it’s as simple as pressing a button.

Some older models still need you to go to the manufacturer’s website, download a firmware file from your router’s support page, and upload it to the administrator interface.

Even if your wireless network isn’t experiencing any issues, you should upgrade your firmware on a regular basis for speed enhancements, new features, and security updates.

To see if your router has the most recent firmware, do the following:

  • Connect to your router’s network using a web browser on your computer or mobile device.
  • In the web browser, type the router’s IP address.
    • If you’re not sure what your IP address is, look for an information sticker on your router.
  • Use the admin username and password to log in..
    • Look at the information sticker on the bottom or back of your router if you don’t know what the correct admin password or username is.
  • Select Firmware Update or Router Update from the drop-down menu.
    • Because there are so many different routers, you may have to dig a little and put in some effort to discover the correct one.
  • Wait for your router to find the latest recent firmware and install it.
    • The update should never be interrupted. If it takes a long time and your router appears to be unresponsive, wait a few minutes before disconnecting and re-connecting it to the power source.

Examine Your Frequency

Examine your network’s administrator interface to ensure it is set up for optimal performance.

If you have a dual-band router, switching to the 5GHz frequency instead of the more popular 2.4GHz band will likely improve speed.

Not only will you get better speeds with 5GHz, but you’ll also get less interference from other wireless networks and gadgets because 5GHz isn’t as widely utilized.

The majority of new dual-band routers should allow you to use the same network name, or SSID, on both bands.

Look for the 5GHz network option in your router’s management interface, and give it the same SSID and password as your 2.4GHz network. As a result, your devices will automatically select the best signal available whenever possible.

If your router doesn’t let you utilize the same SSID, give it another name, for as FavourHouse 5GHz, and connect to it manually whenever available.

Intruders On WiFi Should Be Blocked.

In today’s world, having an encrypted, password-protected WiFi network is a requirement. The need for open, fast WiFi networks is growing as more people rely on them than ever before.

You should encrypt your WiFi and safeguard it with a strong, difficult-to-guess password. The following should be included in a strong password:

  • Use a mix of capital and lowercase characters, symbols, and numbers in your message.
  • Common passwords like 123456, qwerty, and others should be avoided.
  • Make sure your password has at least eight characters. Brute force may be used to guess short passwords.
  • Personal information, such as your name, the name of your pet, or your phone number, should not be included in the password.
  • Make your password one-of-a-kind and don’t write it down on a piece of paper. Use a password manager if you can’t remember it.
secure your wifi

Create a separate guest network and either drastically limit its range or encrypt it with a different password that you change on a regular basis if you have a lot of visitors.

Purchase A WiFi Booster, Repeater, Or Extender

WiFi repeaters are very basic devices that rebroadcast an existing signal from your WiFi router as a new network.

This new network is simply an extension of your main network, and any data that passes through it passes via your main network as well.

WiFi extenders and boosters are similar in that they magnify the current signal before rebroadcasting it to form a second network.

WiFi boosters make sense in circumstances when the initial signal is very weak since they often have a longer range than WiFi repeaters.

wifi booster

It’s a good idea to use WiFi booster software to examine current WiFi coverage and decide the best approach to extend the existing WiFi network when using a WiFi repeater or booster to get the greatest performance.

Install A New Antenna.

If your router has an inside antenna, replacing it with an exterior one is a smart idea because the latter sends a better signal.

You may have received antennas with your router that you can install yourself, but if not, many router manufacturers offer antennas separately.

In many circumstances, you may select between omnidirectional antennas, which broadcast a signal in all directions, and directional antennas, which broadcast a signal in one direction only.

Because most built-in antennas are omnidirectional, if you buy an external antenna, be sure it says “high-gain” on the package.

Toggle to 5GHz

The 5GHz wireless band transmits data quicker over shorter distances and is often less congested than the 2.4 GHz frequency.

Consider switching to it if your router supports it for a quick improvement in short-range performance.

Follow the instructions below to modify your WiFi by switching your router to 5GHz.

  • As an administrator, log in to your router.
  • Open the Wireless Settings tab in Settings.
  • The 802.11 band should be changed from 2.4 GHz to 5 GHz.
  • Apply the changes.
  • To implement the changed settings, restart your router.

The 5 GHz wireless frequency has the disadvantage of not entering solid things as well as the 2.4 GHz wireless frequency.

This can be an issue in business buildings and residential areas, thus using 5 GHz in combination with 2.4 GHz is recommended to have the best of both worlds.

Change To A Different Channel

Interference is a significant problem, particularly for people who reside in heavily crowded places. Other wireless networks, as well as some cordless phone systems, microwaves, and other electrical equipment, might slow down speeds.

When connecting with your devices, all current routers may switch between several channels.

Most routers will determine the channel for you, but if other wireless networks use the same channel as you, signal congestion will occur.

When set to Automatic, a decent router will try to select the least crowded channel, while older or less expensive routers may just select a predetermined channel, even if it isn’t the best. That might be an issue.

You can view what channels neighbouring Wi-Fi networks are utilizing on Windows-based PCs. Type netsh wlan show all from the command prompt to get a list of all wireless networks and channels active in your area.

The abovementioned network analyzers may also display this information, frequently in a graphical style that is easier to understand.

Stick to channels 1, 6, and 11 for 2.4GHz since they’re the only ones that don’t overlap with other channels.

However, because 5GHz employs non-overlapping channels, picking the proper one should be considerably easier.

If the Auto option doesn’t seem to be working for you, log into your router’s administrator dashboard, go to the basic wireless category, and choose one manually.

Run another speed test to determine if the Manual setting delivers a better signal and faster speeds in your issue locations than the Automatic setting.

You should be aware that channel congestion can change over time, so if you manually select a channel, you should check in every now and then to ensure that it is still the best option.

Your ISP (Internet Service Provider) Should Be Contacted.

You could perhaps call your internet service provider and ask for assistance.

If your ISP actually cares about you, they would assist you in remotely diagnosing your WiFi performance difficulties or even send a technician to evaluate your WiFi signal strength and assist you in boosting your wireless signal.

Thanks for reading.

ALSO READ: Tips and Tricks on the Amazon Music App

Share with friends

2 Responses

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

join our newsletter

Signup today for free and get notified of our new updates.